Eiki LC-XS25 Manuel d'utilisateur télécharger pdf (Page 6)

Safety Instructions

Openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it

from overheating, and these openings must not be blocked

or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using

or installing the projector, the following precautions

should be taken.

–

Do not put any flammable object or spray can near

the projector, hot air is exhausted from the ventilation

holes.

–

Keep the exhaust vent at least 3' (1 m) away from any

objects.

–

Do not touch a peripheral part of the exhaust vent,

especially screws and metallic part. This area will

become hot while the projector is being used.

–

Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also cause fire

hazard by heat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperature inside the projector.

Air Circulation

Do not roll the projector more

than 20 degrees from side to

side.

Do not point the projector up to project an

image.

Do not point the projector down to project

an image.

Do not put the projector on either side to

project an image.

Install the projector properly. Improper Installation may

reduce the lamp life and cause a fire hazard.

Installing the Projector in Proper

Position

USE CAUTION IN CARRYING OR TRANSPORTING

THE PROJECTOR

– Do not drop or bump the projector, otherwise damages

or malfunctions may result.

–

When carrying the projector, use a suitable carrying

case.

–

Do not transport the projector by using a courier or

transport service in an unsuitable transport case. This

may cause damage to the projector. To transport the

projector through a courier or transport service, consult

your dealer for their information.

–

Do not put the projector in a case before the projector

is cooled enough.

Moving the Projector

When moving the projector, close the slide shutter and

retract the adjustable feet to prevent damage to the

lens and cabinet. When the projector is not in use

for an extended period, put it into a suitable case to

protect the projector.

When handling the projector, do not drop, bump,

subject it to strong forces, or put other things on the

cabinet.

Air Intake Vent

Exhaust Vent

(Hot air exhaust)

Air flow

Do not pitch the projector more

than 20 degrees above and

below.

1 2 3 4 5 6 7 8 9 10 11 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Eiki LC-XS25 Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Télévisions Eiki LC-XS25