Eiki EIP-WX5000L Manuel du propriétaire Page 81
- Page / 85
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
79
Troubleshooting
Check
• Projector power cord is not plugged into the wall outlet.
• Power to the external connected devices is off.
• The selected input mode is wrong.
• Cables are incorrectly connected to the projector.
• Remote control batteries have run out.
•
External output has not been set when connecting notebook computer.
•
When the connected DVI digital equipment is turned on before the
“DVI” input mode is selected on the projector, the image may not be
projected properly or may not be displayed at all. Ensure that the
appropriate input mode has been selected and set the input signal type
on the projector before you turn on the connected equipment.
•
Is the lens cover correctly attached?
•
Is the filter cover correctly attached?
•
Is the lamp unit cover correctly attached?
• Cables are incorrectly connected to the projector.
• “Bright” is set to minimum position.
• The “Shutter” is closed.
• Image adjustments are incorrectly set.
(COMPUTER 1/2, DVI, HDMI only)
• Input signal type (RGB/Component) is incorrectly set.
(VIDEO, S-VIDEO only)
• Video Input system is incorrectly set.
• Adjust the focus.
• The projection distance exceeds the focus range.
• When an optional lens is attached, refer to the owner’s manual
of the lens.
•
There is fog on the lens. If the projector is carried from a cold
room into a warm room, or if it is suddenly heated, condensation
may form on the surface of the lens and the image will become
blurred. Please set up the projector at least one hour before it is
to be used. If condensation should form, remove the power cord
from the wall outlet and wait for it to clear.
(Computer Input only)
• Perform “Fine Sync” Adjustments. (“Clock” Adjustment)
• Perform “Fine Sync” Adjustments. (“Phase” Adjustment)
• Turn off the LCD display of the notebook computer.
• Noise may appear depending on the computer.
• The “DNR” (Digital Noise Reduction) setting is not correct.
• Cables are incorrectly connected to the projector.
• Volume is set to minimum.
• The “MUTE” function is working.
• The “Speaker” menu is set to “Off”.
Problem Page
28
—
36
24–27
16
24
78
68
73
24–27
49
41
49
51
57
31
22
—
53
53
76
—
50
24–27
36
37
55
Sound is heard but no
picture appears.
Color is faded or poor.
Picture is blurred;
noise appears.
Picture appears but no
sound is heard.
No picture and no sound
or projector does not start.
- EIP-WX5000 1
- EIP-WX5000L 1
- IMPORTANT 2
- Introduction 3
- PRODUCT DISPOSAL 4
- Pages 79 and 80 5
- Contents 6
- Preparing 6
- Reference 7
- SETUP MANUAL 8
- IMPORTANT SAFEGUARDS 10
- Accessories 13
- Throw Distance 14
- Part Names and Functions 15
- Projector (Rear View) 16
- Remote Control 17
- 2 Insert the batteries 18
- Using the Remote Control 18
- Rear view 19
- Remote control 19
- 2 Slide the ADJ./MOUSE 20
- 3 Use the mouse function 20
- Quick Start 21
- 4. Adjust the angle 22
- 8. Turn the power off 22
- 7. Select the input mode 22
- Setting Up the Projector 23
- Projecting a Reversed Image 25
- Terminals on the Projector 26
- RCA adaptor plug 27
- (commercially available) 27
- * To ensure safety, do not 29
- Turning the Projector On/Off 30
- Image Projection 31
- Using the Adjustment Feet 32
- Adjusting the Focus 33
- Selecting the Type of the 34
- Correction 34
- GEOMETRIC ADJUSTMENT 35
- 1 Press KEYSTONE on the pro 36
- 3 Press \ or 36
- 4 Press KEYSTONE to display 36
- 6 Press KEYSTONE to set the 37
- Switching the Input 38
- Adjusting the Volume 38
- 1 Press MAGNIFY 39
- Freezing a Moving 40
- Selecting the Picture 40
- Resize Mode 41
- 1 Press SHUTTER CLOSE 43
- 2 Pressing SHUTTER OPEN will 43
- 1 Press BREAK TIMER 43
- Menu Items 44
- “Picture” menu 45
- “Audio” menu 47
- “Options 1” menu 47
- Using the Menu Screen 49
- 1 Press MENU 49
- 2 Press 49
- To adjust the projected 50
- Menu operation Page 47 52
- Using the “Options 1” Menu 58
- Function 61
- When the system lock is set 62
- Changing the keycode 62
- 1 Setting a Password 63
- If You Forget Your Password 63
- 2 Select “OK”, and then press 65
- Mild detergent 68
- 2 Remove the filter cover 69
- 4 Replace the filter cover 70
- Maintenance Indicators 71
- Regarding the Lamp 73
- 1 Press STANDBY-ON on the 74
- 2 Remove the lamp unit cover 74
- 3 Remove the lamp unit 75
- 4 Insert the new lamp unit 75
- 1 Connect the power cord 76
- 2 Reset the lamp timer 76
- Computer Compatibility Chart 77
- 2 Remove the lens cover 79
- Attaching the Optional Lens 79
- Troubleshooting 81
- Specifications 83
- 86-21-5396-0088 85
- 86-21-5396-0318 85
Produits connexes et manuels pour Projecteurs Eiki EIP-WX5000L
Projecteurs Eiki HDT700 Manuel d'utilisateur
(57 pages)
(57 pages)
Projecteurs Eiki LC-XT9 Manuel d'utilisateur
(25 pages)
(25 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.178 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels