Eiki EIP-WX5000L Manuel du propriétaire télécharger pdf (Page 30)

Turning the Projector On/Off

Info

• When “Auto Restart” is set to “On”:

If the power cord is unplugged from the AC outlet or the

breaker switch is turned off when the projector is on,

then the projector automatically turns on when the power

cord is plugged into the AC outlet or the breaker switch

is turned on. (See page 63.)

• English is the factory preset language. If you want to change

the on-screen display to another language, change the lan-

guage according to the procedure on page 65.

▼On-screen display

Power cord

Supplied

accessory

Connecting the Power Cord

Plug the supplied power cord into the

AC socket on the rear of the projector.

Then plug into the AC outlet.

Turning the Projector On

Before performing the steps in this section,

connect any equipment that you use with the

projector. (See pages 24–27.)

Remove the lens cap and press STANDBY-

ON on the projector or on the remote con-

trol.

• The power indicator illuminates red.

• After the lamp indicator illuminates, the projec-

tor is ready to start operation.

• When System Lock is set, the keycode input

screen appears. Enter the right keycode to

start projection. See page 60 for details.

Note

• The lamp indicator illuminates or blinks, in-

dicating the status of the lamp.

Green: The lamp is on.

Blinking green: The lamp is warming up.

Red:

The lamp is shut down abnormally

or the lamp should be replaced.

•

When switching on the projector, a slight flick-

ering of the image may be experienced within

the first minute after the lamp has been illumi-

nated. This is normal operation as the lamp’s

control circuitry is stabilizing the lamp output

characteristics. This does not indicate malfunc-

tion.

• If the projector is put into standby mode and

immediately turned on again, the lamp may

take some time to illuminate.

Turning the Power Off

(Put-

ting the Projector into Standby Mode)

Press STANDBY-ON on the projector or

on the remote control, then press that

button again while the confirmation mes-

sage is displayed, to put the projector

into standby mode.

Power cord

To AC outlet

To AC socket

Rear view

Lens cap

STANDBY-ON

button

Lamp indicators1, 2

Power indicator

STADNBY-ON button

Info

• You can unplug the power cord from the AC outlet even if

the cooling fan is still running. Even if you unplug the power

cord from the projector, the cooling fan continues to run

for a while.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 84 85

Commentaires sur ces manuels

Pas de commentaire

Eiki EIP-WX5000L Manuel du propriétaire Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Eiki EIP-WX5000L