Eiki EIP-WX5000L Manuel du propriétaire Page 26
- Page / 85
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
24
Connecting the Projector to Other Equipment
Before connecting, ensure that the power cord of the projector is unplugged from the AC outlet and turn off
the equipment to be connected. After making all connections, turn on the projector and then the other
pieces of equipment. When connecting a computer, ensure that it is the last equipment to be turned on after
all the connections are made.
IMPORTANT: Ensure that the appropriate input mode has been selected on the projector before you
turn on the connected equipment.
• For more details of connection and cables, refer to the owner’s manual of the connected equipment.
• You may need other cables or connectors not listed below.
COMPUTER/COMPONENT1
DVI-D
DVI Digital cable (commercially available)
RGB cable (supplied)
Mini D-sub 15 pin/5 BNC cable (commercially available)
Computer audio cable (
ø
3.5 mm stereo minijack,
commercially available)
RGB output terminal
RGB output terminal
Computer audio output
terminal
DVI digital output terminal
Computer audio cable (
ø
3.5 mm stereo minijack,
commercially available)
Computer audio output
terminal
Computer audio cable (
ø
3.5 mm stereo minijack,
commercially available)
Computer audio output
terminal
HDMI cable (commercially available) HDMI
HDMI digital output terminal
Equipment Cable
Terminal on connected equipment
Terminal on the projector
Computer
COMPUTER/COMPONENT2
Terminals on the Projector
Note
• When connecting the projector to a compatible computer other than a PC (VGA/SVGA/XGA/SXGA/UXGA)
or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more
information.
• When connecting to the DVI-D or HDMI terminal, select “D. PC RGB” for “Signal Type” in the “Picture”
menu.
• See page 75 “Computer Compatibility Chart” for a list of computer signals compatible with the projector. Use
with computer signals other than those listed may cause some of the functions to not work.
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest
Macintosh Dealer.
• Depending on the computer you are using, an image may not be projected unless the computer’s
external output port is switched on. Refer to the specific instructions in your computer's owner’s manual
to enable your computer’s external output port.
- EIP-WX5000 1
- EIP-WX5000L 1
- IMPORTANT 2
- Introduction 3
- PRODUCT DISPOSAL 4
- Pages 79 and 80 5
- Contents 6
- Preparing 6
- Reference 7
- SETUP MANUAL 8
- IMPORTANT SAFEGUARDS 10
- Accessories 13
- Throw Distance 14
- Part Names and Functions 15
- Projector (Rear View) 16
- Remote Control 17
- 2 Insert the batteries 18
- Using the Remote Control 18
- Rear view 19
- Remote control 19
- 2 Slide the ADJ./MOUSE 20
- 3 Use the mouse function 20
- Quick Start 21
- 4. Adjust the angle 22
- 8. Turn the power off 22
- 7. Select the input mode 22
- Setting Up the Projector 23
- Projecting a Reversed Image 25
- Terminals on the Projector 26
- RCA adaptor plug 27
- (commercially available) 27
- * To ensure safety, do not 29
- Turning the Projector On/Off 30
- Image Projection 31
- Using the Adjustment Feet 32
- Adjusting the Focus 33
- Selecting the Type of the 34
- Correction 34
- GEOMETRIC ADJUSTMENT 35
- 1 Press KEYSTONE on the pro 36
- 3 Press \ or 36
- 4 Press KEYSTONE to display 36
- 6 Press KEYSTONE to set the 37
- Switching the Input 38
- Adjusting the Volume 38
- 1 Press MAGNIFY 39
- Freezing a Moving 40
- Selecting the Picture 40
- Resize Mode 41
- 1 Press SHUTTER CLOSE 43
- 2 Pressing SHUTTER OPEN will 43
- 1 Press BREAK TIMER 43
- Menu Items 44
- “Picture” menu 45
- “Audio” menu 47
- “Options 1” menu 47
- Using the Menu Screen 49
- 1 Press MENU 49
- 2 Press 49
- To adjust the projected 50
- Menu operation Page 47 52
- Using the “Options 1” Menu 58
- Function 61
- When the system lock is set 62
- Changing the keycode 62
- 1 Setting a Password 63
- If You Forget Your Password 63
- 2 Select “OK”, and then press 65
- Mild detergent 68
- 2 Remove the filter cover 69
- 4 Replace the filter cover 70
- Maintenance Indicators 71
- Regarding the Lamp 73
- 1 Press STANDBY-ON on the 74
- 2 Remove the lamp unit cover 74
- 3 Remove the lamp unit 75
- 4 Insert the new lamp unit 75
- 1 Connect the power cord 76
- 2 Reset the lamp timer 76
- Computer Compatibility Chart 77
- 2 Remove the lens cover 79
- Attaching the Optional Lens 79
- Troubleshooting 81
- Specifications 83
- 86-21-5396-0088 85
- 86-21-5396-0318 85
Produits connexes et manuels pour Projecteurs Eiki EIP-WX5000L
Projecteurs Eiki HDT700 Manuel d'utilisateur
(57 pages)
(57 pages)
Projecteurs Eiki LC-XT9 Manuel d'utilisateur
(25 pages)
(25 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.350 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels