Eiki LC-X70 Manuel d'instructions Page 45
- Page / 56
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
45
APPENDIX
LAMP REPLACE COUNTER
Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset,
the LAMP REPLACE Indicator stops lighting.
NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.
Turn projector on, press MENU button and ON-SCREEN
MENU will appear. Press POINT LEFT/RIGHT button(s) to
move a red frame pointer to SETTING Menu icon (refer to
page 40).
Press POINT UP/DOWN button to move a red frame pointer
to “Lamp counter reset” and then press
SELECT button. The
message "Lamp replace counter reset?" is displayed. Move
the pointer to [Yes] and then press SELECT button.
1
2
Another confirmation dialog box appears and select [Yes] to
reset Lamp Replace Counter.
3
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper
handling may result in accidents, injury, or create a fire hazard.
● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a
shorter period of time than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE INDICATOR
lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous
use of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who are
familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who
are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
LAMP HANDLING PRECAUTIONS
Move the pointer to Lamp counter reset and then press
SELECT button. The message “Lamp replace counter
reset?” is displayed.
- MODEL LC-X70 1
- TO THE OWNER 2
- SAFETY PRECAUTIONS 2
- SAFETY INSTRUCTIONS 3
- COMPLIANCES 4
- TABLE OF CONTENTS 5
- FEATURES AND DESIGN 6
- SETTING-UP PROJECTOR 8
- POSITIONING PROJECTOR 9
- PREPARATION 10
- ADJUSTABLE FEET 10
- MOVING PROJECTOR 11
- CONNECTING PROJECTOR 12
- CONNECTING TO COMPUTER 13
- CONNECTING TO VIDEO EQUIPMENT 14
- OPERATION OF REMOTE CONTROL 15
- Operating Range 16
- TOP CONTROLS AND INDICATORS 17
- OPERATING ON-SCREEN MENU 18
- BEFORE OPERATION 19
- MENU BAR 19
- BASIC OPERATION 20
- ZOOM ADJUSTMENT 21
- FOCUS ADJUSTMENT 21
- LENS SHIFT ADJUSTMENT 21
- KEYSTONE ADJUSTMENT 21
- SOUND ADJUSTMENT 22
- COMPUTER INPUT 23
- AUTOMATIC MULTI-SCAN SYSTEM 24
- PC ADJUSTMENT 25
- MANUAL PC ADJUSTMENT 26
- PICTURE IMAGE SELECT 28
- PICTURE SCREEN ADJUSTMENT 29
- VIDEO INPUT 30
- SELECTING VIDEO SYSTEM 31
- PICTURE IMAGE 34
- SETTING MENU 37
- Time left until Lamp off 39
- Projector mode 40
- Wireless Mouse mode 40
- OPERATING WIRELESS MOUSE 41
- MAINTENANCE 42
- APPENDIX 43
- CLEANING PROJECTION LENS 43
- AIR FILTER CARE AND CLEANING 43
- LAMP REPLACE 44
- LAMP HANDLING PRECAUTIONS 45
- TROUBLESHOOTING 46
- Problem: Try these Solutions 46
- Projector Condition 48
- Indicators 48
- RESOLUTION 49
- Video source 50
- PC source 50
- XLow/Low/Mid/High 51
- TECHNICAL SPECIFICATIONS 52
- CONTROL PORT CONNECTOR 53
- USB CONNECTOR (Series B) 53
- OPTIONAL PARTS 54
- LENS REPLACEMENT 54
Produits connexes et manuels pour Projecteurs Eiki LC-X70
Projecteurs Eiki LC-X7 Manuel d'utilisateur
(24 pages)
(24 pages)
Miele 26632052USA manuály
Uživatelské manuály a uživatelské příručky pro Sporáky Miele 26632052USA.
Poskytujeme 1 manuály pdf Miele 26632052USA ke stažení zdarma podle typů dokumentů: Instalační manuál
Commentaires sur ces manuels